Axial SCX24 1/24 AXI00002遥控电动四驱攀爬车越野车 1/24 RTR-HEC模型平台

Axial推出全新 SCX24 2019 Jeep Wrangler JLU CRC 4WD小型RTR攀爬遥控车。比例1/24，能够在室内和户外行走，无论是办公室桌面还是家庭都是理想的赛道，而防水的电子设备又能轻松应付户外各种地形。全时四驱，钢制梯形车架，前三连杆和后四连杆悬挂，提升通过性；车桥使用蜗齿，增加离地间距。拥有快速拆装的电池设计，供选择的两款颜色Jeep® Wrangler仿真的车壳搭配KMC Machete授权轮圈和Nitto Trail Grappler轮胎，两颗前置LED，即使在夜间也能照亮前路。RTR产品，配备AX-4 2.4GHz遥控器、AE-6电子变速器，AS-1舵机，180马达(88T)，Dynamite® 7.4v 350mAh 2S LiPo锂电(USB充电器)。参数：离地27mm、高度106.5mm、长度199.5mm、轴距132.5mm、宽度99.5mm。产品编号AXI00002

No matter where you are, the 1/24 scale Axial® SCX24™ Jeep® Wrangler JLU CRC 4WD makes it the scene for RC adventures. If you’re stuck at work, go crawling on your desk. A messy room becomes an ideal obstacle course. Take your vehicle outside — where its water-resistant electronics are safe from the elements — and set up an exciting trail with a few holes, twigs, and rocks. Full-time 4WD and a 3-link front/4-link rear suspension let you muscle over big challenges. Worm gears on the axles increase ground clearance, while realistic steel frame rails stand up to hard knocks. The Axial® SCX24™ Jeep® Wrangler JLU CRC performs like a winner and looks like one, too. The realistic body rides on licensed KMC Machete wheels and Nitto Trail Grappler tires. For quick battery access, just remove one clip to tilt back the body. Two LEDs in the front bumper light up the trail for night-time crawling. The SCX24™ Jeep® Wrangler JLU CRC comes ready-to-run with radio and electronics included and installed.

长：199.5mm

宽：99.5mm

高：106.5mm

轴距：132.5mm

重量：0.22kg

You expect solid performance from Axial® and the SCX24™ 2019 Jeep® Wrangler delivers, with engineering and equipment that pulls the greatest potential from its compact size. The included Dynamite™ 88T brushed electric motor supplies the torque you need to get up and over most obstacles. And despite the dimensions, it’s a pretty capable rock crawler, too! We've also included extra suspension links for adjusting your wheelbase length.

EVERYTHING IS INCLUDED! The SCX24™ includes everything you need to get going. The product is fully assembled, and we've included batteries for the transmitter, and a LiPo battery pack and USB charger.

INCLUDED:

• Axial AX-4 2.4GHz, 3 Channel Radio System

• Axial AS-1 Servo • Axial AE-6 ESC/Receiver Combo

• USB Charger (DYNC1062)

• Dynamite 88T 030 Brushed Electric Motor

• Dynamite 350mAh 2S LiPo 7.4V Battery Pack (DYNB0012)

• 4AA Batteries for the Transmitter

The AX-4 transmitter features a throttle trim knob for low, medium, and high speed setting, a switch for steering servo reversing, steering dual rate, a switch for third channel applications (aux port on the ESC/Receiver), steering trim, battery level indicator, a bind button, and on/off switch.

The AE-6 ESC/Receiver features a jumper for setting one of two brake options (brakes, or instant reverse), two LED light ports, an auxiliary port (channel 3), a channel 2 port, and a steering servo port.

FEATURESFRONT AND REAR SOLID AXLES The front and rear axles consist of a two piece, molded plastic solid axle design. For optimal handling, the SCX24™ suspension features a three-link front and four-link rear setup.

STEEL C-CHANNEL CHASSIS FRAME RAILS

Just like the 1/10th scale SCX10™ platform, the SCX24™ chassis features rugged and sturdy steel c-channel frame rails with bracing to keep everything intact and aligned.

DYNAMITE 88T BRUSHED MOTOR

The Dynamite 88T brushed electric motor provides the right amount of torque to help ascend steep climbs. It’s mated to a steel motor mount to keep flex to a minimum, which helps protect the gears.

WORM GEARS The front and rear differentials each house a worm screw and worm gear setup to get the power to the axles and create higher ground clearance.

DURABLE STEEL AXLES

Steel front and rear axles, front stub axles along with steel dogbones provide strength and durability to keep things running during tough climbs and rough trails.

SPLINED DRIVE SHAFTS

The front and rear drive shafts are splined and sleeved to allow for maximum suspension travel while keeping the power to the wheels.

COILOVER SHOCK ABSORBERS

Even at this small scale, the combination of coilover shocks with simulated reservoirs and durable plastic suspension links delivers the crawling performance you’ve known and expect from Axial. #AXIALPERFORMANCE

LED LIGHTS INCLUDED

Two bright LED lights are included and are mounted in the front bumper. An extra LED light port on the ESC allows you to add optional LED lights.

4-LINK REAR SUSPENSION

The suspension geometry utilizes a 4-Link design for the rear which is optimized to reduce axle steer and torque twist. We've also included extra suspension links for adjusting your wheelbase length.

KMC XD229 MACHETE CRAWL WHEELS

Officially licensed KMC XD Machete wheels are legendary in the off-road world. They are molded in black and feature stunning scale details, despite the small scale.

HINGED BODY SYSTEM

The hinged body system offers easy access to on-board components. You can quickly reach the battery and chassis by removing just a single body clip and swinging the body up.

NITTO TRAIL GRAPPLER M/T TIRES

The officially licensed Nitto Trail Grappler M/T Tires offer a fantastic blend of off-road performance while still retaining excellent composure for on-road use.

AXIAL AS-1 SERVO

Mounted just above the front axle is the Axial AS-1 servo, with a servo saver that allows for steering accuracy, while also providing protection for the servo gears in the event of a bind or impact.